“Duct tape” is a misnomer. It’s great for fixing busted broom handles, patching holes in your shoulder bag, and keeping cardboard boxes closed – but it’s pretty useless on actual ducts. Make sure you use the right product to seal leaky ductwork and save your favorite adhesive for making duct tape wallets.
WHY DUCT TAPE DOESN’T WORK ON DUCTS
Duct tape – or gaffer’s tape, as it’s known in the movie business – is a cloth-backed, rubber-adhesive tape. It originally came to the US during World War II when the military stocked up on this miraculous tape for emergency repairs on the battlefield. The product is incredibly strong, which makes it a great binding agent.
Unfortunately, strength isn’t a necessary characteristic when it comes to sealing ductwork. Instead, the best tape for heating ducts must be able to withstand extreme temperature fluctuations.
Back in 1998, Berkeley lab tested 19 different sealants, including several types of duct tape, in an accelerated aging test. The process involved alternating between 54-degree cooled air and 167-degree heated air every five minutes for three months to mimic the changes seen from summer to winter. Of the 19 sealants tested, duct tapes were the only products that failed. The extreme temperature changes degraded the adhesive, causing the tape to fail within days.
SEALING DUCTS WITH DUCT TAPE COULD COST YOU
The whole purpose of sealing ductwork is to cut back on air leaks notorious for raising your energy bills. If you use duct tape on ducts, the savings will last only briefly. Once the tape fails, it no longer seals ductwork leaks and you lose heated and cooled air through these holes.
What’s worse, using duct tape on ducts could violate local codes. The International Energy Conservation Code (IECC) proclaims that any tape used on ductwork must be labeled by the Underwriters Laboratory (UL). Look for UL 181A or 181B. Also, be aware that a UL rating doesn’t guarantee long-term adhesive performance. The UL 181 listing instead refers to flame resistance, which is important for local code compliance.
ACTUAL DUCT SEALING PRODUCTS
In the Berkeley lab test, the products that lasted the entire three months included:
- Duct mastic: Mastic is a gooey material applied with a disposable paintbrush or putty knife. Larger gaps in ductwork joints should first be covered with fiberglass mesh tape and painted over with duct mastic.
- Foil-backed tape: This is the best tape for heating ducts. It uses a large amount of acrylic or butyl adhesive to resist drying out and becoming brittle. The metal foil backing also withstands temperature changes without shrinking and failing the way cloth-backed duct tape does. With foil-backed tape, excellent duct sealing is possible without the messiness of mastic.
- Injected aerosol sealant: Developed at Berkeley Lab’s Environmental Energy Technologies Division, aerosol sealant is a sticky vinyl polymer. When pumped through the ducts, it automatically seeks out leaks, spans the hole, and dries, permanently sealing the leak in the process. The Berkeley lab tested this sealant for much longer, changing ambient air pressure and temperature every 20 minutes for two years, with no noticeable change in duct tightness.
HOW TO FIND DUCTWORK LEAKS
How do you know your ducts are leaking in the first place? The first step for homeowners is to inspect ductwork seams to see if any of the above tactics have been used. A skilled professional is the best person to track down leaks is to perform a blower door test and watch the pressure readings on a manometer. Accessible runs can be sealed with mastic or foil-backed tape, while injected aerosol sealant is effect for sealing inaccessible runs located behind finished walls.
Need help finding and sealing ductwork leaks? Contact your local Pro Handymen or call us to talk about your home repair, maintenance and improvement projects.